Kenwood NX-210(G) Service Manual page 10

NX-210(G)
■ Forming the Cord ASSY
Form the Cord ASSY according to the procedure shown
in the fi gure.
Cord ASSY
Cord ASSY
10
DISASSEMBLY FOR REPAIR
Fold it so that the end of the "TX-RX"
side fit the "-" silk screen line.
Turn over the cord ASSY.
Fold it so that the bent part of
"TX-RX" side fit the connector outline
of "CONT" side.
Turn over the cord ASSY.
Fold it so that the bent part of
"CONT" side fits the end of "TX-RX"
side.
Cord ASSY is rotated by 180 degrees.
CN337
TX-RX
unit
■ Correspondence when replacing the case
(A02-4076-01)
Apply the dry-surf (410-0019-05) around the LCD and
18-key part of the case when replacing the case.
■ Forming the GPS coaxial cable (E3H-0001-00)
Form the GPS coaxial cable and stick the Fibrous Sheet
(G10-1362-04)as shown in the fi gure.
Note:
Sub(GPS) unit (X58-5240-10) cannot be used.
Fibrous Sheet