Table of Contents
Advertisement
Indesit
Company
PREPARING THE MACHINE FOR USE
Adding Salt for the First Time
1. Open the door and the remove the basket.
2. The Salt Pot is located on the left hand side of
the bottom of the tank.
3. Remove the salt pot lid, by turning anticlockwise.
4. Fill the salt pot with water (first time of use only).
5. Add Dishwasher Salt. Only use salt suitable for a
dishwasher.
6. Replace the Salt Cap.
7. Run a 'Soak' Cycle. His will remove any spilt salt
and salt water which overflowed from the salt
pot, during filling.
Notes: -
The Salt must be refilled when the 'Salt Warning Lamp' Illuminates.
When refilling it is normal for water to be displaced from the salt pot.
Adding Rinse Aid
As the rinse aid diminishes, the size of t
changes, as illustrated below.
Full
3/4full
1/2 full
1/4 full - Should refill to eliminate spotting
Empty
1. Open the dishwasher door. The Tablet/Rinse Aid dispenser is located on the inside of the door.
2. Open the rinse aid cap.
3. Adjust the amount of rinse aid to be dispensed. Position 4,
is for normal use and is the default setting.
4. Fill the container with rinse aid. Clear up any spillages.
Spilt rinse aid can cause excessive foaming when the
machine is next used.
Note: -
Rinse Aid must be topped up when the Low Rinse Aid warning
lamp illuminates.
Service Manual UK
h
e
b
a l
k c
d
t o
o
n
h t
e
r
n i
s
e
6 of 28
Salt Pot Lid
C
(Rinse-Aid indicator)
a
d i
e l
v
l e
Rinse Aid Cap
Adjust lever
(Rinse)
n i
d
c i
t a
r o
English
Hide quick links:
Advertisement
Table of Contents
