Indesit ICD661UK Service Information page 22

Indesit Company
K1 TANK REMOVAL WHEN REPLACING THE TANK
1. Remove the inner door panel (B), the dispenser and door lock can be left in place.
2. Remove the outer case (C).
3. Remove 1 screw securing the hinge bracket to the tank.
4. Remove and release from inside the tank the fixing nuts for the air inlet break and siphon on either
side of the tank.
5. Remove the spray arm (H).
6. Remove the sump ring by turning anti clockwise to release.
7. Carefully lift the tank clear of the machine guiding the tank past the hinge brackets.
K2 TANK REMOVAL WHEN REPLACING OTHER COMPONENTS
___ ____ ___ __________ ___ _____ ___ _____ _____ ______
Click to modify the font displayed
Level II ______ _______
Level III ____ _______
Level IV _____ _______
Level V _____ _______
Main PCB
Heating element
Pressure sensor
Regeneration
Load
Service Manual UK
Reservoir Temp. sensor
Start
condenser
22 of 28
Drain Pump
Overflow
Pressure switch
solenoid valve
Motor pump
continued overleaf.......
Hinge Bracket
Fixing Screw
Drain plug
Regeneration
Water softener
English