Ricoh D197 Service Manual page 1075

SC Tables: SC5xx (Paper Feed and Fusing)
SC No. Level
SC No. Level
SC502-01 B
D197/D198/D199/D200/D201/D202
Error Name/Error Condition/Major Cause/Solution

1st tray limit sensor connector disconnection, malfunction or
sensor's dirt.

1st tray lift motor connector disconnection, malfunction

Foreign matter, such as paper scrap, is caught between the
paper feed tray and the tray lift motor.

Paper set fault

Paper overload

Reset the paper.

Remove the foreign matter.
1st tray limit sensor, 1st tray lift motor

Check the harness.

Reset the connector.

Replacement
1st paper feed unit, 1st tray

Replacement
Paper transport IOB

Replacement
Error Name/Error Condition/Major Cause/Solution
2nd Tray Lift Error
The machine detects the error of the 2nd tray lift motor 3 times
consecutively when the 2nd tray is lifted..
(The message of resetting the tray is displayed when the
machine detects the error consecutively 2 times or less.)

2nd tray limit sensor connector disconnection, malfunction,
dirt

2nd tray lift motor connector disconnection, malfunction

Foreign matter, such as paper scrap, is caught between the
paper feed tray and the tray lift motor

Paper set fault
6-32 SM