Omron V680-HAM91 User Manual page 176

Section 7
Appendices
Mode Function Table
Some of the functions cannot be used in the V600-compatible mode.
Refer to followings table which shows supported functions for each mode.
Function
READ
WRITE
PARITY CHECK
NOISE MEASUREMENT
ADDRESS SHIFT
Note1. Output the error code in the data output bits(OD0 to OD15) .
2. The data output bits(OD0 to OD15) turns FFFF hex(ON all bits), when error is occurred.
While V600-series can change the Address switches during power is being supplied, V680 series cannot be changed
the Access Address Switches. The V680 series reads the Access Address Setting Switches only when power supply is
turned ON. Turn OFF the power supply before changing the Access address setting switches.
RFID System
174
User's Manual
Mode Setting
16bits read
Verify read
Read with wire-saving mode (See
Note2.)
1byte Write
2byte Write
BIT SET, BIT CLEAR
AUTO MODE1
AUTO MODE2
TRIGGER MODE1
TRIGGER MODE2
( ) (See Note1.)
V600-Compatible Mode
AUTO MODE3
TRIGGER MODE3