Connecting and Disconnecting the ID Flag Sensor
Mounting Procedure
Line up the direction of the triangle mark on the connectors of the ID Flag Sensor and the interface cable, and then
press in the connector of the interface cable.
The lock will engage when the interface cable is pressed
into the connector on the ID Flag Sensor.
Removal Procedure
To remove the connector of the interface cable, always hold the connector and pull it out in a straight line.
Pulling the cable may result in severing the cable or other product failure.
Unlock the connector on the ID Flag Sensor and pull out
the connector of the interface cable.
Installation, Connections, and Wiring
Section 4
RFID System
41
User's Manual