Omron V680-HAM91 User Manual page 50

Section 4
Installation, Connections, and Wiring
V680-D1KP66T
Mounting on Non-metallic Material
Mount the RF Tag using M3 pan-head screws from the
marked side.
Tightening torque: 0.3 to 0.5 N⋅m
Mounting on Metallic Material
Communications distance will decrease if there is
metal on the back of the V680-D1KP66T RF Tag. If the
RF Tag is to be used mounted to metallic material, use
the separately sold special attachment (V600-A86) or a
non-metallic spacer (e.g., plastic or resin).
When installing RF Tags, refer to RF Tag Mounting Precautions.
Refer to Effect of Metal on Back of RF Tags (Reference) for information on the effect of metal on the back of the V680-
D1KP66T.
RFID System
48
User's Manual
p.137
p.142
Mounting Hole Dimensions
M3 pan-head screw
25±0.2
Marked side
M3 pan-head screw
Mounting Hole Dimensions
Marked
side
25±0.2
Attachment (V600-A86)
Two, M3
25±0.2
Two, M3
25±0.2