Supermicro X10SDV User Manual page 19

JOH1
JPH1
JPI C1
2
JPV1
JPW1
JSD1, JSD2
JSMB1
JSTBY1
JTGLED1
JTPM1
LAN1 ~ LAN8
L-SAS0 ~ L-SAS15
M2-SRW1 ~ SRW3
MP-SRW1 ~ SRW2
SLOT6, SLOT7
UID
USB 0/1
USB 2
USB 3/4, 5/6
VGA
LED Description
LED3 Power LED
LED7 UID Switch LED
LED8 Overheat/PWR Fail/Fan Fail
LED
LEDM1 BMC Heartbeat LED
LEDS1 SAS Heartbeat LED
(7TP8F/7TP4F only)
LEDT1 LAN7 Link Status
LEDT2 LAN7 Activity
LEDT3 LAN8 Link Status
LEDT4 LAN8 Activity
Overheat LED Header
4-pin Power Connector for HDD use (To provide power
from the motherboard to onboard HDD devices.)
Power Supply SMBus I
12V 8-pin DC Power Connector (To provide alternative
power for special enclosure when the 24-pin ATX power is
not in use.)
24-pin ATX Power Connector
SATA DOM (Device On Module) Power Connectors
SMBus Header
5V Standby Power Header
LAN7 ~ LAN8 Activity LED Header
Trusted Platform Module (TPM)/Port 80 Connector
Gigabit Ethernet (RJ45) Ports (LAN1 ~ LAN6)
(LAN3 ~ LAN6 on 7TP8F/TP8F only)
10Gigabit Ethernet (SFP+) Ports (LAN7 ~ LAN8)
SAS 2.0/SATA 3.0 Ports (7TP8F/7TP4F only)
M.2 Mounting Screws
PCI-E 2.0 X1 / I-SATA5 Slot Mounting Screws
CPU PCI-E 3.0 X8 Slot
Unit ID Button
Back panel USB 3.0 Ports
USB Type-A Connector
Front Access USB 2.0 Ports
Back panel VGA Port
LED Indicators
Color/State
Green: On
Blue: On
Red: Solid on
Blinking
Green: Blinking
Green: Blinking
Red
Green: On
Green: Blinking
Green: On
Green: Blinking
1-11
Chapter 1: Introduction
C Header
2
System Power On
Unit Identified
Overheat
PWR Fail or Fan Fail
BMC: Normal
SAS Active
SAS Error
LAN7 Normal
LAN7 Active
LAN8 Normal
LAN8 Active
Status