Supermicro X10SDV User Manual page 18

X10SDV Flex ATX Series Motherboard User's Manual
Jumper
JBR1 BIOS Recovery
JBT1 CMOS Clear
JI C1/JI C2 SMB to PCI-Exp. Slots
2 2
JPB1 BMC Enable (Debug use only)
JPG1 VGA Enable
JPL1 LAN1 Enable
JPL2 LAN2 Enable
JPL3 LAN3/4/5/6 Enable
(7TP8F/TP8F only)
JPME1 ME Recovery
JPME2 Manufacturing Mode
JPS1 SAS 2.0 Controller Enable/Dis-
able (7TP8F/7TP4F only)
JPTG1 10Gb Ethernet Enable
JPUSB1 USB Wakeup (USB0/1)
JWD1 Watch Dog Enable
Connector
BT1
COM1
FAN1 ~ FAN4
FANA, FANB
IPMI LAN
I-SATA0 ~ I-SATA5
I-SGPIO1
JD1
JF1
JGP1
JIPMB1
JL1
JLANLED1
JMD1
JMP1
JNVI C1
2
Jumpers
Description
Headers/Connectors
Onboard Battery
COM1 Header
CPU/System Cooling Fans
Dedicated IPMI LAN Port
Intel SATA Ports (I-SATA0 / I-SATA1 support SuperDOM,
I-SATA4 via M.2, I-SATA5 via Mini-PCIE mSATA)
Serial Link General Purpose I/O Header
Speaker (Pins 1-3: Power LED, Pins 4-7: Speaker)
Front Panel Control Header
General Purpose I/O Header
4-pin External SMbus I
Chassis Intrusion Header
LAN3 ~ LAN6 Activity LED Header (7TP8F/TP8F only)
M.2 PCI-E 3.0 X4 / I-SATA4 Slot
Mini PCI-E 2.0 X1 / I-SATA5 Slot
NVMe I C Header
2
1-10
Default
Pins 1-2 (Normal)
Open: Normal, Short: Clear CMOS
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Description
C Header (for an IPMI Card)
2