Appendix A Bios Error Beep Codes; Bios Error Beep Codes - Supermicro X10SDV User Manual

During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue
with bootup. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue to bootup. If a fatal error oc-
curs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
A-1 BIOS Error Beep Codes
Note: A PC buzzer must be installed via JD1 to hear the BIOS Error
Beep Codes.
Beep Code/LED
1 beep
5 short beeps + 1 long
beep
8 beeps
OH LED On
Appendix A

BIOS Error Beep Codes

BIOS Error Beep Codes
Error Message
Refresh
Memory error
Display memory
read/write error
System OH
A-1
Appendix A: POST Error Beep Codes
Description
Circuits have been reset.
(Ready to power up)
No memory detected in the
system
Video adapter missing or with
faulty memory
System Overheat