Flush A New Sprayer - Graco Ultra Operation, Parts

Flush a New Sprayer

Always start with a fully charged battery.
Refer to battery and charger information
provided.
This sprayer arrives from the factory with a
small amount of test material in the system. It
is important that you flush this material
from the sprayer before using it for the first
time. See Cleaning Fluid Compatibility,
page 26 and Static Grounding Instructions
(Oil-Based materials), page 26 for additional
information when using oil-based materials.
1. Remove cup assembly from the sprayer
by turning and pulling down.
2. Unscrew cup cover from the cup support.
3A4476E
Common Procedures
3. Make certain FlexLiner is in the cup
support.
4. Fill FlexLiner with cleaning fluid. See
Cleaning Fluid Compatibility, page 26.
ti23676a
ti23361a
ti23383a
23