Chapter 8: Using The Contacts Feature; Searching For A Contact - Avaya 9621G Using Manual

Chapter 8: Using the contacts feature

You can save up to 250 names and up to 6 telephone numbers per name. When you press the Contacts
button, you are automatically put into Contacts search mode.
Note:
When you press the Contacts button you may not see all the functionality described in this chapter.
This would be because your system administrator has disabled changes to Contacts.

Searching for a contact

About this task
Use this task to search for a contact that already exist in your contacts list.
You can jump to a certain group of letters in your contacts list by pressing the associated dial
pad button. For example, if you press 3, the deskphone displays entries starting with D, E, or
F depending on the names of contacts that you might have in the contacts list that start with
any of these letters. With each successive dialpad key press, the deskphone displays the
matching entries.
Procedure
1. Press CONTACTS.
2. Use the dialpad to type the name that you want to search.
Next steps
If your administrator has set up a corporate contact list or database, you can extend a search.
For information, see
Using Avaya 9621G/9641G IP Deskphones SIP
If you set up your contacts in the Last Name and First Name format, type the letters
of the last name. If you have set up your contacts using a different format, type the
most likely letters that matches the contact that you want to find.
Extended searching on page 66.
November 2013 65