Ricoh S-P2 Service Manual page 97

5507 001 Paper Supply Ala(rm)
5507 004 MaintenanceKit A
5507 009 Cartridge Alarm
5507 128 Interval: Others
5507 132 Interval: A3
5507 133 Interval: A4
5507 134 Interval: A5
5507 141 Interval: B4
5507 142 Interval: B5
5507 160 Interval: DLT
5507 164 Interval: LG
5507 166 Interval: LT
5507 172 Interval: HLT
SC/Alarm Setting
5515*
With @Remote in use, these SP codes can be set to issue an SC call when an SC error
occurs. If this SP is switched off, the SC call is not issued when an SC error occurs.
001 SC Call
Switches the control call on/off for the paper supply.
DFU
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified number
transfer sheets for each paper size (A3, A4, B4, B5,
DLT, LG, LT, HLT)
When switched on this function informs the @Remote
supply center that the maintenance kit requires
servicing.
[OFF/ON]
When switched on this function informs the @Remote
supply center that the toner cartridge is almost empty
(near-end).
[OFF/ON]
The "Paper Supply Call Level: nn" SPs specify the
paper control call interval for the referenced paper
sizes. DFU
[00250 to 10000/1000/1 Step]
[0 or 1 / 1 / 1] 0: OFF 1: ON
Printer Engine Service Mode
5
95