Ricoh S-P2 Service Manual page 74

4. Troubleshooting
1st/2nd Message
Press # to continue/ Paper Size:, Paper
Type:
Proxy User Name, Password error
4
Proxy setting or connection error
RC Gate, Connection error
ROM Update, Waiting for Data
ROM Update:, Waiting for Data
Remove Misfeed Duplex Unit/ Open
Duplex Unit cover
Remove Misfeed Internal Path/ Open
Front Cover
Remove Misfeed Paper Exit Cover/
Open Paper
Exit Cover
72
Problem/Solution
Requested paper size does not match dial setting on the paper
tray.
• Press [#] to start printing.
Proxy user name and password are incorrect.
• Change current user name and password to the correct
user name and password.
1) Proxy address port No. is invalid, 2) proxy is not active, 3)
invalid center URL is set, 4) center is not active, 5)
proxy is not set.
• Check all proxy settings.
Cannot communicate with remote communication gate.
• Check printer connection.
• Check remote communication gate.
The printer is waiting for updated data. The image file will be
downloaded from an Internet Web site. The image data will
overwrite previous ROM , engine firmware, PS DIMM, and
other data on the machine.
• No action required.
The printer is receiving updated data.
• No action required.
Paper is jammed under the paper exit cover.
• Remove and re-install the duplex unit.
• Remove any jammed paper from the duplex unit and
under the rear cover.
Paper is jammed in the specified input paper feed tray.
• Open the front and rear cover.
• Remove jammed paper.
Paper is jammed in the specified input paper tray.
• Open the front and rear cover
• Remove jammed paper.