Functions Of The Control Panel - Hitachi R-D6800S How To Use Manual

Functions of the Control Panel

The Control Panel is a touch panel made of glass.
If you touch button, the current settings will be displayed.
The upper portion of the Control Panel is the display and the lower portion is for operation.
Touch the lower portion of the Control Panel to change the settings, if necessary.
First touch it.
Setting Energy Saving mode Adjusting temperature settings
Set Energy Saving mode. Set temperature for each
compartment.
Energy-saving by reducing
Normally, use the " Mid. "
cooling power of each
compartment.
setting.
" Trip " （旅行）
Refrigerator
Pg.54
Compartment
" Save " （節電）
Pg.54 Freezer Compartment
Notice
■ About the display
● Close all the doors before adjusting the settings. While a door of the refrigerator is opened or an indicator lamp on the display is blinking, it will not
work even if you touch the Control Panel.
● For checking the settings, please touch
saving, indicator lamps on the display and operation portions will be turned off 2 minutes after the operation. However, indicator lamps such as " Quick
Freeze " , " Quick Cool " , " Save " , " Trip " , " Quick " , " Off " , " Water " and " eco operation " will not be turned off.
● When opening the refrigerator door, the displayed characters become lit. They become unlit about 15 seconds after closing it.
■ About the Control Panel
● Response of the touch panel may change depending on the surrounding temperature, humidity, physical condition of the user or operation status of
the adjoining electric product.
● Release a finger and touch the panel again if the panel does not respond after touching it. False detection may occur (it may be kept pressed) if the
time interval between key touches is too short. Response of the touch panel does not improve even if you touch it strongly.
● The panel may not respond if it is wet or dirty. Wipe it off with a dry cloth.
It will turn on while it is working in " eco " mode.
It will turn on while the Control Panel is locked.
Blink indicating any trouble.
Auto Door
It will turn on while setting the Auto Door.
Water It will turn on when water in the water supply container is getting low.
Setting an ice-making
Set the ice making
mode
" Quick " （急速製冰）
" Normal " （製冰）
Pg.45
" Off " （製冰停止）
Pg.49
button. Once all the indicator lamps turn on, and then the current setting will be displayed. For energy
Providing information
Pg.64
Pg.53
※ All the indicator lamps are lit for the sake of explanation.
Setting a cooling mode Setting the Vacuum Compartment
Set a cooling mode
" Quick Cool " （急冷藏）
Pg.51
" Quick Freeze " （ 急冷凍）
Pg.50
" Vegetable " （蔬果室強）
Pg.51
Pg.55
Pg.54
Pg.51
Set the Vacuum
Compartment mode.
" Subzero " （ -1˚C ）
Pg.45
" Chiller " （ +1˚C ）
Pg.49
All lamps off
Pg.52
Pg.47
Pg.47
Pg.47
41