Vacuum Compartment/Auto Door Compartment - Hitachi R-D6800S How To Use Manual

Vacuum Compartment
1
Pull out the Vacuum Case.
For how to remove,
Be sure to remove foods contained in the Vacuum Case.
2
Remove the Fresh Cassette.
Wipe off dirt from the Fresh Cassette with a firmly wringed
wet cloth.
3
Wipe off following parts with a soft
cloth which is steeped in lukewarm
water.
Aluminum Tray
Vacuum gasket
4
Attach the Fresh Cassette to the
Vacuum Case.
5
Attach the Vacuum Case.
For how to attach,
Caution
● Do not rinse the Fresh Cassette in water.
● Do not touch the glass on the ceiling in the compartment
(photocatalyst & LED light) with a finger or do not rub it
with a dry cloth. Use a wet cotton-tipped stick, etc. to
remove dirt, gently, if any.
● If detergents and others except lukewarm water are used
to clean the vacuum gasket, the vacuum gasket may be
damaged, deformed or change in color, which may cause
the vacuum state unable to keep well.
● Loosened vacuum gasket or loose-fitting door of the Vacuum
Case may cause the vacuum state unable to keep well.
Auto Door Compartment
Clean the auto door unit when food falls onto or is caught in the upper part of the auto door unit and when liquid is deposited on the auto door unit.
1
Unplug the power plug.
2
Remove each case of the Lower Freezer or the
Vegetable Compartment.
3
Remove all foods which drop or are caught in.
4
Wipe off deposited liquid soup using a soft and dry cloth.
Caution
● Make sure that water never splash to the AUTO DOOR unit. Otherwise, it may cause malfunction.
● Do not disassemble the AUTO DOOR unit. Otherwise, it may cause injury and/or malfunction.
Once a month
Pg.60
Pg.43
Gasket seat
Vacuum Container
Pg.60
Pg.61
When vacuum gasket has heavy dirt
1
Remove the vacuum gasket from
the Vacuum Case.
Grasp the tab of the vacuum gasket
on the observer's upper right and
remove it by hand carefully.
2
Rinse dirty portion in water using
a soft sponge, etc.
※ Do not use the detergents, etc.
Vacuum gasket
Wipe off dirt from the groove for attaching the vacuum
gasket.
3
Wipe off excess moisture with a
dry cloth and dry it out naturally.
4
Attach the vacuum gasket.
Align the tab to the notch accurately, and then combine
them together.
Tab
● Make sure to disconnect the power plug from
the power outlet before starting maintenance to
avoid injury.
Tab
Groove for attaching the
vacuum gasket.
Notch of the groove
Warning
AUTO DOOR Unit
57