Functions Of The Control Panel - Hitachi R-SF48GH Manual

Functions of the Control Panel

Push the button to change the settings, if necessary.
Notice
● To confi rm settings, open the refrigerator door or push any button. The indicator lamps become lit again.
● The indicator lamp on the Control Panel will be unlit for energy saving about 40 seconds after operation. However, indicator lamps such as " Energy
Saving " mode, " Freezer " , " Fridge " , " Quick " , " Off " , " Water " [ " eco " Operation] and [Door Open & Close ] will not be turned off.
● When opening the refrigerator door, the displayed characters become lit. They become unlit about 15 seconds after closing it.
● Close all the doors before adjusting the settings. While a door of the refrigerator is opened or an indicator lamp on the display is blinking, it will not
work even if you push the Control Panel.
Function
selection
button
Temperature
adjustment
button
Function
selection
button
※ All the indicator lamps are lit for ※ All the indicator lamps are lit for ※ All the indicator lamps are lit for
※
the sake of explanation.
Providing information
Door
Is lit when a door is frequently opened or closed.
(Door Open & Close)
Providing information
It will turn on while it is working in " eco " mode.
Pg.54
It will turn on while the Control Panel is locked.
Pg.55
Blink indicating any trouble.
Water (Water
It will turn on when water in the water supply
Supply
container is getting low.
indicator)
Setting the Vacuum Compartment
+1˚C
- 1˚C
" All the lamps off "
Setting a cooling mode
" Fridge "
" Freezer "
" Veg "
Setting an ice-making
" Quick "
" On "
" Off "
Adjusting temperature settings
Normally, use the " ■■ " setting.
Refrigerator Compartment
Freezer Compartment
Setting Energy Saving mode
Energy-saving by reducing cooling power of each compartment.
"Save"
Pg.54
Pg.63
Pg.49
Pg.47
Pg.47
Pg.47
Pg.45
Pg.51
Pg.53
Pg.49
Pg.48
Pg.49
Pg.45
Pg.51
Pg.54
41