Functions Of The Control Panel - Hitachi R-E5000S How To Use Manual

Hide thumbs

Table of Contents

Functions of the Control Panel

The Control Panel is a touch panel made of glass.

If you touch

button, the current settings will be displayed.

The upper portion of the Control Panel is the display and the lower portion is for operation.

Touch the lower portion of the Control Panel to change the settings, if necessary.

First touch it.

Setting Energy Saving mode

Set Energy Saving mode.

Energy-saving by reducing

cooling power of each

compartment.

"Trip"

Pg.54

"Save"

Pg.54

Notice

■ About the display

● Close all the doors before adjusting the settings. While a door of the refrigerator is opened or an indicator lamp on the display is blinking, it will not

work even if you touch the Control Panel.

● If you confirm the setting, touch

● If you touch

button again after finishing the operation, it will be unlit. The displayed characters will be unlit 40 seconds later without touching

button again for energy-saving. However, the setting of "Energy Saving" mode, "Fridge" , "Freezer" and "Quick" indicator lamps and "Off"

the

and "Water" indicators and [ " eco " operation indicator lamp] will not be unlit.

● When opening the refrigerator door and the displayed characters are lit, they become unlit about 15 seconds after closing it.

■ About the Control Panel

● Response of the touch panel may change depending on the surrounding temperature, humidity, physical condition of the user or operation status of

the adjoining electric product.

● Release a finger and touch the panel again if the panel does not respond after touching it. False detection may occur (it may be kept pressed) if the

time interval between key touches is too short. Response of the touch panel does not improve even if you touch it strongly.

● The panel may not respond if it is wet or dirty. Wipe it off with a dry cloth.

BB0040171T_R-E5000SHV_A.indd 41

It will be illuminated automatically to show that energy saving mode including

Frost Recycle Cooling and others is set to ON when it is operating under the low

power consumption.

Notice

・ Immediately after installation or when plentiful foods are stored at a time

・ When the door is opened/closed frequently or the door is not closed completely

・ It is set to "Freezer" , "Fridge" , "Quick" , or "Veg" .

・ When the ambient temperature around the refrigerator is about 35˚C or higher.

It will turn on while the Control Panel is locked.