TP-Link TL-WR902AC User Manual page 96

Chapter 5
• Firmware Version - The version information of the router's firmware.
• Hardware Version - The version information of the router's hardware.
• LAN - This field displays the current settings of the LAN, and you can configure them
on the Advanced >
• MAC address
• IP address - The LAN IP address of the router.
• Subnet Mask
• WISP - This field displays the information of the public wireless network.
• Wireless Name of Root AP
wireless network.
• Connection Status
network.
• Wireless 2.4GHz/5GHz
function, and you can configure them on the
Wireless Settings page.
• Wireless Radio
• Name (SSID)
• Channel - The current wireless channel in use.
• Mode - The current wireless working mode in use.
• Channel Width
• MAC Address
• WAN - This field displays the current settings of the WAN, and you can configure them
on the Network > WAN
• MAC Address
• IP Address - The current WAN (Internet) IP Address. This field will be blank
or 0.0.0.0 if the IP Address is assigned dynamically and there is no Internet
connection.
• Subnet Mask
• Default Gateway
Dynamic IP as the Internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
• DNS Server - The IP addresses of DNS (Domain Name System) server.
• Traffic Statistics - The router's traffic statistics.
• Received (Bytes)
• Received (Packets)
• Sent (Bytes) - Traffic in bytes sent out from the WAN port.
• Sent (Packets)
Network > LAN page.
- The physical address of the router.
- The subnet mask associated with the LAN IP address.
- The network name (SSID) of the connected public
- The current status of the connected public wireless
- This field displays the basic information or status of the wireless
- Indicates whether the wireless feature is enabled or not.
- The SSID of the router.
- The current wireless channel width in use.
- The physical address of the router.
page.
- The physical address of the WAN port.
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- Traffic in bytes received from the WAN port.
- Traffic in packets received from the WAN port.
- Traffic in packets sent out from the WAN port.
Configure the Router in Hotspot Router Mode
Advanced > Wireless 2.4GHz/5GHz
Renew or
>
Release here to
93