TP-Link TL-WR902AC User Manual page 215

Chapter 8
• Primary DNS (Optional)
• Secondary DNS (Optional)
provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as
Address automatically.
• When you choose Dynamic IP(DHCP)
the page as below.
8. 5. 2. DHCP Client List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting > DHCP
connected to the router.
• Client Name - The name of the DHCP client.
• MAC Address - The MAC address of the DHCP client.
• Assigned IP - The IP address that the router has allocated to the DHCP client.
• Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, the dynamic IP address will be automatically renewed.
- Input the DNS IP address provided by your ISP.
- Input the IP address of another DNS server if your ISP
in Network > LAN, the DHCP Server function will be disabled. You will see
> DHCP Client List
Configure the Router in Client Mode
to view the information of the clients
Obtain an IP
212