TP-Link TL-WR902AC User Manual page 53

Chapter 4
1. Insert your USB storage device into the router's USB port directly or using a USB
cable. Wait several seconds until the USB LED becomes solid on.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
3. Go to Advanced >
4. Click Start to enable the FTP Server.
5. Click Enable to enable the Internet access to the FTP server.
6. Specify a port number for the
7. Click Save.
¾ To specify a folder to be accessed via the FTP server:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced >
3. Click Add New Folder.
4. Specify a name for the folder to be shared in the
folder you want to share or select
USB Settings > FTP Server.
Service Port. The default value is 21.
USB Settings > FTP Server.
Share entire partition
Configure the Router in Standard Router Mode
Display Name field. And select the
to share all folders.
50