TP-Link TL-WR902AC User Manual page 54

Chapter 4
5. Click Save.
6. You can check which folder is shared and also edit or delete the folder.
¾ To access the USB disk locally:
1. Connect Your USB Disk
Insert your USB storage device into the router's USB port directly or using a USB cable.
Wait several seconds until the USB LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than 2 devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been
connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to
Advanced > USB Settings
2. Access Your USB Disk Locally
Refer to the following table for access instructions. You can customize user accounts by
referring to User Accounts.
> Storage Sharing and click
Configure the Router in Standard Router Mode
Eject Disk.
51