TP-Link TL-WR902AC User Manual page 170

Chapter 6
How can I
do that?
Done!
6. 4. 5. Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting > Wireless 2.4GHz
3. Configure the advanced settings of your wireless network and click Save.
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Setting > Wireless 2.4GHz
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select Allow the stations specified by any enabled entries in
the list to access as the filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click Add New and fill in the blank.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-
07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save and click Back.
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
> Wireless
Configure the Router in Access Point Mode
> Wireless MAC
in the Status drop-down list.
Advanced.
Filtering.
167