TP-Link TL-WR902AC User Manual page 190

Chapter 7
• Disable Security - The wireless security function can be enabled or disabled. If
disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal
shared passphrase.
• Version - Select Automatic,
• Encryption - Select Automatic,
• Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
• Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
• WEP - It is based on the IEEE 802.11 standard.
• Type - The default setting is Automatic, which can select Shared Key or Open
System authentication type automatically based on the wireless client's
capability and request.
• WEP Key Format
Hexadecimal format stands for any combination of hexadecimal digits (0-9,
- It's the WPA/WPA2 authentication type based on pre-
WPA-PSK or WPA2-PSK.
TKIP or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
- Hexadecimal and ASCII formats are provided here.
Configure the Router in Range Extender Mode
187