Defining The Scheduler Log File Size; Configuring Remote User Authentication - Cisco Nexus 9000 Series Configuration Manual

Defining the Scheduler Log File Size

Step 3
Step 4
Defining the Scheduler Log File Size
You can configure the log file size for capturing jobs, schedules, and job output.
Procedure
Step 1
Step 2
Step 3

Configuring Remote User Authentication

You can configure the scheduler to use remote authentication for users who want to configure and schedule
jobs.
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
100
Command or Action
show scheduler config
Example:
switch(config)# show scheduler config
config terminal
feature scheduler
scheduler logfile size 16
end
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
scheduler logfile size value
Example:
switch(config)# scheduler logfile size
1024
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Configuring the Scheduler
Purpose
(Optional)
Displays the scheduler configuration.
(Optional)
Copies the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Defines the scheduler log file size in kilobytes. The
range is from 16 to 1024. The default is 16.
Note If the size of the job output is greater than
the size of the log file, then the output is
truncated.
(Optional)
Copies the running configuration to the startup
configuration.