Guidelines And Limitations For The Scheduler; Default Settings For The Scheduler; Configuring The Scheduler; Enabling Or Disabling The Scheduler - Cisco Nexus 9000 Series Configuration Manual

Configuring the Scheduler

• You must have network-admin user privileges to configure a scheduled job.

Guidelines and Limitations for the Scheduler

The scheduler has the following configuration guidelines and limitations:
• The scheduler can fail if it encounters one of the following while performing a job:
• Verify that you have configured the time. The scheduler does not apply a default timetable. If you create
• While defining a job, verify that no interactive or disruptive commands (for example, copy bootflash:

Default Settings for the Scheduler

This table lists the scheduler default settings.
Parameters
Scheduler state
Log file size
Configuring the Scheduler

Enabling or Disabling the Scheduler

You can enable the scheduler feature so that you can configure and schedule jobs, or you can disable the
scheduler feature after it has been enabled.
Procedure
Step 1
Step 2
a schedule and assign jobs and do not configure the time, the job is not started.
file ftp: URI, write erase, and other similar commands) are specified because the job is started and
conducted noninteractively.
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
[no] feature scheduler
Example:
switch(config)# feature scheduler
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
Guidelines and Limitations for the Scheduler
Default
Disabled
16 KB
Purpose
Enters global configuration mode.
Enables or disables the scheduler.
99