Overriding A Policy - Cisco Nexus 9000 Series Configuration Manual

Overriding a Policy

Procedure
Step 1
Step 2
Step 3
Overriding a Policy
You can override a system policy.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
172
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
event manager policy policy-script
Example:
switch(config)# event manager policy
moduleScript
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
show event manager policy-state
system-policy
Example:
switch(config-applet)# show event
manager policy-state __ethpm_link_flap
Policy __ethpm_link_flap
Cfg count : 5
Cfg time interval : 10.000000 (seconds)
Hash default, Count 0
event manager applet applet-name override
system-policy
Configuring the Embedded Event Manager
Purpose
Enters global configuration mode.
Registers and activates an EEM script policy.
The policy-script can be any case-sensitive
alphanumeric string up to 29 characters.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
(Optional)
Displays information about the system policy that
you want to override, including thresholds. Use
the show event manager system-policy command
to find the system policy names. For information
about system policies, see Embedded Event
Manager System Events and Configuration
Examples, on page 237.
Overrides a system policy and enters applet
configuration mode. The applet-name can be any
case-sensitive alphanumeric string up to 29