Tftp Put; File Size - Cisco MGX 8220 Installation And Configuration Manual

Appendix C Firmware Upgrade and Downgrade Procedures

tftp put

The UNIX TFTP (Trivial File Transfer Program) is used to write firmware or backup boot code to the
ASC Flash or disk, and to the SM Flash.
Example:
The number of bytes reported as being sent by the TFTP routine should be compared with the size of
the firmware or backup boot code file.
Example:

File Size

The firmware file size tends to be rather unique. The firmware file size can be used to verify that the
firmware file was successfully TFTP-put to the ASC disk.
Example:
size
512
512
<size>
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
tftp shelf
tftp> bin
tftp> put <file> AXIS_<FILE>.<EXTENSION>
tftp> quit
ls -l <file>
-rw-rw-rw- <size> <file>
tftp> put <file> AXIS_<FILE>.<EXTENSION>
Sent <size> bytes in <seconds>seconds
shelf.1.<3|4>.ASC.<a|s>shellConn
shelf.1.<3|4>.ASC.<a|s> cd "C:fw"
shelf.1.<3|4>.ASC.<a|s> ll
date
<date>
<date>
<date>
Description of Upgrade/Downgrade Terminology
time name
<time> .
<time> .
<time> ASC.FW
Cisco MGX 8220 Installation and Configuration
C-43