Snmp-Server Enable Traps Entity; Snmp-Server Enable Traps Feature-Control Featureopstatuschange; Snmp-Server Enable Traps Hsrp State-Change - Cisco Nexus 9000 Series Configuration Manual

Configuring SNMP
Command

snmp-server enable traps entity

[entity_fan_status_change] [entity_mib_change]
[entity_module_inserted]
[entity_module_removed]
[entity_module_status_change]
[entity_power_out_change]
[entity_power_status_change]
[entity_unrecognised_module]
Example:
switch(config)# snmp-server enable traps
entity
snmp-server enable traps feature-control
[FeatureOpStatusChange]
Example:
switch(config)# snmp-server enable traps
feature-control
snmp-server enable traps hsrp [state-change]
Example:
switch(config)# snmp-server enable traps hsrp
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
Enabling SNMP Notifications
Purpose
Enables ENTITY-MIB SNMP notifications.
Optionally, enables the following specific
notifications:
• entity_fan_status_change—Enables entity fan
status-change notifications.
• entity_mib_change—Enables entity MIB
change notifications.
• entity_module_inserted—Enables entity
module inserted notifications.
• entity_module_removed—Enables entity
module removed notifications.
• entity_module_status_change—Enables entity
module status-change notifications.
• entity_power_out_change—Enables entity
power-out change notifications.
• entity_power_status_change—Enables entity
power status-change notifications.
• entity_unrecognised_module—Enables entity
unrecognized module notifications.
Enables feature-control SNMP notifications.
Optionally, enables the following specific
notifications:
• FeatureOpStatusChange—Enables feature
operation status-change notifications.
Enables CISCO-HSRP-MIB SNMP notifications.
Optionally, enables the following specific
notifications:
• state-change—Enables HSRP state-change
notifications.
129