Engine
Specification
Minimum width
Standard width
Removing the driving pulley
Driving pulley removal
- With the appropriate tool placed into the internal slots, remove the nut with the built-in Belleville washer.
Appropriate tools:
Specific tooling
020442Y Pulley lock wrench
- Remove the entire start-up crown unit with the
torque limiter.
- Remove the fixed driving half-pulley together with
the O-ring and the steel washer touching the bush-
ing.
ENG - 76
Liberty 125 - 200 4tempi
VERSION 200
Desc./Quantity
21±0.2 mm
22±0.2 mm