Helmet Bay; Spoiler; Fuel Tank - PIAGGIO Liberty 125 Workshop Manual

Chassis

Helmet bay

• Remove the helmet compartment central cover.
• Remove the battery and the fuse box.
• Remove the fuel tank cap and the start-up remote
control switch.
• Unscrew the rear fixing screw and lift the helmet
compartment.
See also
Frame central cover
Frame central cover

spoiler

• Remove the footrest
• Unscrew the two front screws securing it and then
remove the spoiler from the bottom
See also
Footrest

Fuel tank

• Remove the central saddle compartment cover
• Unscrew the front and rear screws on the right
side of the frame
• Disconnect the vent tube and disassemble the
float
CHAS - 162
Liberty 125 - 200 4tempi