Front Handlebar Cover; Headlight Assy. - PIAGGIO Liberty 125 Workshop Manual

Chassis

Front handlebar cover

• Remove the 2 screws in the rear handlebar cover
and the screw under the headlamp.
• Pull up and detach the front handlebar cover,
disconnect the headlight assembly connections.

Headlight assy.

• Remove the front handlebar fairing
• Unscrew the 4 screws securing it and remove the
headlight
N.B.
TO REPLACE THE HIGH BEAM/DIPPED BEAM BULB THE
RUBBER COVER MUST BE REMOVED AND THE SUP-
PORT PLATE ROTATED 30° ANTI-CLOCKWISE. TO RE-
PLACE THE POSITION LIGHT BULB, JUST REMOVE IT
FORM THE RUBBER LAMP-HOLDER.
See also
Front handlebar cover
CHAS - 156
Liberty 125 - 200 4tempi