Refitting The Carburettor - PIAGGIO Liberty 125 Workshop Manual

Liberty 125 - 200 4tempi
- Remove the idle flow screw with the O-ring and
the spring.
CAUTION
DO NOT ATTEMPT REMOVING PARTS EMBEDDED IN THE CARBURETTOR BODY SUCH AS:
FUEL SUPPLY PIPE, PIN SEATING, STARTER NOZZLE, THROTTLE VALVE CONTROL VALVE
SHAFT. DO NOT REMOVE THROTTLE-SHAFT CONNECTION SCREWS. THE FIXING SCREWS
ARE CAULKED AFTER THE ASSEMBLY AND THEIR REMOVAL DAMAGES THE SHAFT.

Refitting the carburettor

- Before refitting, wash the carburettor body accu-
rately with a degreasing solvent and compressed
air.
- Pay special attention to the fuel supply pipe and
the plunger seat.
- Clean the main air jet shown in the diagram.
Engine
ENG - 129