Air Duct Filter; Removing The Driven Pulley Shaft Bearing - PIAGGIO Liberty 125 Workshop Manual

Engine

Air duct filter

- Unscrew the 2 fixing screws and slide off the filter.
- Clean with water and milid soap.

Removing the driven pulley shaft bearing

- Remove the clip from the inside of the cover.
- Use the specific tools to remove the bearing from
the crankcase.
CAUTION
USE AN APPROPRIATE REST SURFACE TO AVOID DAM-
AGING THE COVER PAINT.
Specific tooling
020376Y Adaptor handle
020375Y Adaptor 28 x 30 mm
ENG - 66
Liberty 125 - 200 4tempi