Removing The Cam Shaft - PIAGGIO Liberty 125 Workshop Manual

Engine
- Remove the internal hex screw and the counter-
weight shown in the figure.
- Remove the camshaft command pulley and its
washer.
- Remove the command sprocket wheel and the
timing chain.
- Remove the screws indicated in the figure, the
spacer bar and the tensioner pad.
The chain tensioning pad must be removed from
the transmission side. As regards the lower chain
guide pad, it may only be removed after the head
has been removed.
N.B.
IT IS ADVISABLE TO MARK THE CHAIN IN ORDER TO EN-
SURE THAT THE INITIAL DIRECTION OF ROTATION IS
MAINTAINED.
See also
Removal
Transmission cover
Removing the driving pulley

Removing the cam shaft

- Remove the two screws and the cam shaft re-
tainer shown in the diagram.
- Remove the cam shaft.
ENG - 90
Liberty 125 - 200 4tempi