Control Units
2.2 Control Unit 320 (CU320)
Cause and rectification of faults
The following reference contains information about the cause and rectification of faults:
Reference: /IH1/ SINAMICS S120 Commissioning Manual
RESET button
The RESET button is located behind the blanking plate.
Function of the RESET button
The following reference contains information about the cause and rectification of faults:
Reference: /IH1/ SINAMICS S, Commissioning Manual
2.2.4
Dimension drawing
Figure 2-6
Dimension drawing of the CU320
2-16
Equipment Manual Control Units and Additional System Components
Equipment Manual, (GH1), 12/2004 Edition, 6SL3097-2AH00-0BP1