Siemens RUGGEDCOM RX1501 Installation Manual page 55

RUGGEDCOM RX1501
Installation Guide
Test
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-29
IEC 61000-4-11
IEC 61000-4-12
IEC 61000-4-16
IEC 61000-4-17
IEC 60255-5
a
Siemens-specified severity levels
IEEE 1613 (C37.90.x) EMI Immunity Type Tests
NOTE
The RX1501 meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for
copper ports.
EMI and Environmental Type Tests
Description
Surge
Induced (Conducted) RFI
Magnetic Field
Voltage Dips and Interrupts
Voltage Dips and Interrupts
Damped Oscillatory
Mains Frequency Voltage
Ripple on DC Power Supply
Dielectric Strength
HV Impulse
Signal ports
DC Power Ports
AC Power Ports
Signal ports
DC Power Ports
AC Power Ports
Earth ground ports
Enclosure Ports
DC Power Ports
AC Power Ports 30% for 1 period, 60% for 50 periods
AC Power Ports
Signal ports
DC Power Ports
AC Power Ports
Signal ports
DC Power Ports
DC Power Ports
Signal ports 2 kVAC (Failsafe Relay output)
DC Power Ports
AC Power Ports
Signal ports
DC Power Ports
AC Power Ports
Test Levels
+/- 4 kV Line-to-Earth,
+/- 2 kV Line-to-Line
+/- 2 kV Line-to-Earth,
+/- 1 kV Line-to-Line
+/- 4 kV Line-to-Earth,
+/- 2 kV Line-to-Line
10 V
40 A/m, continuous,
1000 A/m for 1 s
1000 A/m for 1 s
30% for 0.1 s, 60% for
0.1 s, 100% for 0.05 s
100% for 5 periods,
100% for 50 periods
2.5 kV common, 1 kV
differential mode @1 MHz
30 V Continuous, 300 V for 1 s
10%
1.5 kVDC
2 kVAC
5 kV (Failsafe Relay output)
5 kV
Chapter 6
Certification
Severity
Levels
4
3
4
3
a
Note
5
3
4
3
49