Cellular Modem Installation Requirements - Siemens RUGGEDCOM RX1501 Installation Manual

Hide thumbs Also See for RUGGEDCOM RX1501:
Table of Contents

Advertisement

RUGGEDCOM RX1501
Installation Guide
Figure 44: W12, W22 and W32 Cellular Modems
1. Main Antenna SMA Connector
SMA Connector
3. Antenna for First/Primary Cell Modem
The following sections describe the cellular modem modules in more detail:
Section 3.6.1, "Cellular Modem Installation Requirements"
Section 3.6.2, "Diversity Requirements"
Section 3.6.3, "Supported Frequency Bands"
Section 3.6.4, "Installing SIM Cards for GSM, EDGE and HSPA+ Cellular Modems"
Section 3.6.1

Cellular Modem Installation Requirements

The cellular modem module is approved for modular use in mobile applications. The module, as part of the
RX1501, can be integrated into a final product without additional certification from the Federal Communications
Commission (FCC) or Industry Canada (IC) if the application meets the following requirements:
NOTE
If this module is integrated into a portable device, separate approval related to the Specific Absorption
Rate (SAR) requirements of FCC Part 2.1093 and IC RSS-102 is required.
• Persons in the area must be kept at least 20 cm (8 in) from the antenna at all times.
• The antenna gain, including cable loss, must not exceed the maximum rating specified in
"Supported Frequency
• The cellular modem and antenna must not be next to or operate in conjunction with another transmitter or
antenna within a host device.
• A label must be affixed to the end product that indicates the FCC and IC IDs for the cellular modem.
Cellular Modem
W11, W12
W21, W22
W32
• The user documentation for the end product must clearly indicate the operating requirements and conditions
that comply with current FCC and IC radio frequency exposure guidelines.
• The end product must comply with the unintentional emission testing requirements of FCC Part 15.
Cellular Modem Installation Requirements
3
3
2
1
2. Receive Diversity Antenna
Bands".
Order Code
W12
W22
W32
FCC ID
N7MC8705
N7MC5728
N7MC8705 and N7MC5728
Communication Ports
Description
2 Port Cell Modem GSM,EDGE,HSPA+
2 Port Cell Modem EVDO Rev.A Verizon
Wireless
1 Port Cell Modem GSM,EDGE,HSPA+, 1 Port
Cell Modem EVDO Rev.A Verizon Wireless
Section 3.6.3,
IC ID
2417C-MC8705
2417C-MC5728
2417C-MC8705 and 2417C-MC5728
Chapter 3
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ruggedcom rx1510

Table of Contents