Table of Contents
Advertisement
installation
CC40LE/CC40RE Painted panel installation
Inner Panels - CC40LE/CC40RE
CC40RE/CC40LE INNER PANELS
The CC40RE/CC40LE can be equipped with optional steel inner panels.
There are 4 outer panels and 3 inner panels.
NOTE: CC40RE shown in diagrams—CC40LE panels install in the same
order. Installed panels for the CC40LE will appear as mirror images of
diagrams shown below.
Turn off unit and allow to cool to room temperature. Remove the safety
glass and firebox glass — see manual for instructions.
1. Install inner lower base panel.
2. Install panel clips into the slots at the top of the back panel as shown.
3. Manoeuvre in back panel to the back wall of the unit—secure in place
with 2 panel clips and 2 screws.
Panel Clips
4. Install panel clip into the slots at the top of the
side panel as shown.
| City Series
52
919-742
5. Manoeuvre in side panel to the side wall of the unit—secure in place
with 1 panel clips and 1 screws.
tooltip
Panel Clip
6. Reverse steps to remove panels.
Outer Panels - CC40LE/CC40RE
CC40RE/CC40LE OUTER PANELS
Note: Install inner safety glass prior to installation of outer panels-see
instructions in manual
1. Attach Regency logo to the right hand side of outer front panel. The
magnets will be positioned under the outer front base panel to secure
the logo. The logo should be about 3 inches from the right hand corner
of the outer base. Install outer front and side base panel.
Outer base panel install
2. Install side panels - the side panels are secured in place by existing
magnets in the unit.
tooltip
Outer side panel install
3. Install outer safety glass.
4. Reverse steps to remove panels.
1
CITY SERIES
Location of
Regency Logo
11.07.16
Hide quick links:
Advertisement
Table of Contents
