Framing Dimensions Cc40Le (Left Corner) - Regency CC40LE-NG Owners & Installation Manual

Framing Dimensions CC40LE (Left Corner)

NOTE: Framing may be constructed of combustible material (ie. 2 x 4)and does not require steel studs.
Framing
Description
Dimensions
A Framing Height
B Framing Width
C Framing Depth
D Unit Base to Top Enclosure (Min.)
G Vent Centerline Height
NOTE: Unit cannot be load-bearing. All finishing materials must be supported by the framing.
Note: This appliance must be in-
stalled on a level and solid surface
such as a plywood floor which must
be the full width and depth of the
appliance.
CC40LE
37-3/8" (949mm)
48-1/4" (1226mm)
19" (483mm)
63"(1600mm)
56-1/4" (1429mm)
installation
Note: A combined minimum of
120 square inches of open area
is required for the convection air
outlet to cool the enclosure. En-
sure clearances for Convection Air
Outlets are met.
See clearances CC40LE/CC40RE
(single sided) in this manual as there
are different methods as to how this
can be achieved.
City Series | 17