Volkswagen Golf 2013 Quick Reference Specification Book page 35

Fastener Tightening Specifications (cont'd)
Component
Protective plate-to-rear toothed belt guard bolt
Rear toothed belt guard-to-cylinder block bolt
Ribbed belt tensioner-to-accessory bracket bolt
Sealing flange-to-cylinder block bolt
Toothed belt idler pulley-to-cylinder block bolt
Toothed belt idler roller-to-cylinder block bolt/nut
Toothed belt tensioner-to-cylinder block nut
Vibration damper-to-crankshaft bolt
Replace fastener(s).
1)
For bolt tightening clarification, refer to ElsaWeb, Toothed Belt Drive Overview,
2)
items 14 and 15.
Fasten the upper left and lower right bolts first and then tighten all four bolts in a
3)
diagonal sequence.
Lubricate the threads and contact surface.
4)
VW Golf & GTI Quick Reference Specification Book • September 2012
2)
1)
1)
1)
Nm
5
10
1)
20
20 plus an
additional 180°
(½ turn)
15
50 plus an
additional 90°
(¼ turn)
20
20 plus an
additional 45°
(⅛ turn)
10 plus an
additional 90°
(¼ turn)
23