Volkswagen Golf 2013 Quick Reference Specification Book page 129

Bearing play
Measured value (mm)
1.275 to 1.229
1.300 to 1.324
1.325 to 1.349
1.350 to 1.374
1.375 to 1.399
1.400 to 1.424
1.425 to 1.449
1.450 to 1.474
1.475 to 1.499
1.500 to 1.524
1.525 to 1.549
1.550 to 1.574
1.575 to 1.599
1.600 to 1.624
1.625 to 1.649
1.650 to 1.674
1.675 to 1.699
1.700 to 1.724
NOTE: Refer to the Electronic Parts Catalog
Using VW 447 I, remove the input shaft and the outer race/
tapered roller bearing from the transmission housing.
Install the shim with the correct thickness, thickest shim first.
If the measured shim thickness is larger than those listed in the
table, then install two shims that add up to the necessary thickness.
Using VW 510, press the outer race/tapered roller
bearing and the selected shim (1.175 mm in the
example) into the transmission housing using the.
Assemble the transmission housing and tighten the
bolts to 25 Nm plus an additional 90° (¼ turn).
VW Golf & GTI Quick Reference Specification Book • September 2012
(ETKA) for the correct shims.
Adjusting shim
Thickness (mm)
1.250
1.275
1.300
1.325
1.350
1.375
1.400
1.425
1.450
1.475
1.500
1.525
1.550
1.575
1.600
1.625
1.650
1.675
117