Volkswagen Golf 2013 Quick Reference Specification Book page 247

DTC Error Message
P0122 Pedal Position Sensor A
Circuit Low Input
P0123 Pedal Position Sensor A
Circuit High Input
P013A O2 Sensor Slow Response -
Rich to Lean Bank 1 Sensor 2
P0130 O2 Sensor Circuit (Bank 1,
Sensor 1)
P0131 O2 Sensor Circuit (Bank 1,
Sensor 1) Low Voltage
P0132 O2 Sensor Circuit (Bank 1,
Sensor 1)
P0133 O2 Circuit Slow Response
(Bank 1, Sensor 1)
P0135 O2 Heater Circuit (Bank 1,
Sensor 1)
P0136 O2 Circuit (Bank 1, Sensor 2)
VW Golf & GTI Quick Reference Specification Book • September 2012
Malfunction Criteria and
Threshold Value
Signal voltage < 0.20 V
Signal voltage > 4.81 V
EWMA filtered max differential
transient time at fuel cutoff >=
0.5 Sec. for 3 function checks
O2S ceramic temperature
< 640 °C
• VM < 1.75 V
• UN < 1.50 V
• IA or IP > 0.30 V
• VM > 3.25 V
• UN > 4.40 V
• IA or IP > 7.0 V
Signal dynamic slope check
• O2S signal front vs. modeled
O2S signal ratio < 0.40 and >
0.01
• Cycles completed > 400
Oscillation check
• Lambda amplitude signal >
20%
• Cycles > 8
• Time lambda > lambda
amplitude 400 m sec.
Delay check
• Delay modeled lambda signal
minus measured signal > 460
m sec.
• Cycles > 12
• Heater duty cycle > 90%
• O2S ceramic temperature <
720 °C
• Time after O2S heater on 40
Sec.
• Delta voltage one step at
heater switching > 2.0020 V
• Number of checks 10
235