Volkswagen Golf 2013 Quick Reference Specification Book page 202

DTC
P0638 Throttle Actuator Control
Range/Performance
P0641 Sensor Reference Voltage A
Circuit Open
P0651 Sensor Reference Voltage B
Circuit Open
P0657 Actuator Supply Voltage
Circuit Open
P0658 Actuator Supply Voltage A
Circuit Low
P0659 Actuator Supply Voltage
Circuit High
P0697 Sensor Reference Voltage
Circuit/Open
P1609 Crash shut-off was triggered
P169A Loading mode active
U0001 High Speed CAN
Communication Bus
U0002 High Speed CAN
Communication Bus
Performance
U0101 Lost Communication with TCM Time Out failure. No message
U0121 Lost Communication With
Anti-Lock Brake System
(ABS) Control Module
U0146 Lost Communication With
Gateway A
U0155 Lost Communication With
Instrument Panel Cluster
(IPC) Control Module
U0302 Software Incompatibility with
Transmission Control Module
U0402 Invalid Data Received From
Gear Shift Control Module A
190 VW Golf & GTI Quick Reference Specification Book • September 2012
Error Message Malfunction Criteria and
Threshold Value
• Time to close to reference
point > 6 Sec.
and
• Reference point 2.88%
• TPS 1 signal 0.40 - 0.60 V
• TPS 2 signal 4.20 - 4.60 V
• TPS 1 and TPS 2 4.82 - 5.18 V
Signal voltage deviation
> ± 0.3 V
Signal voltage deviation
> ± 0.3 V
Signal voltage > 4.4 - 5.6 V
Signal voltage < 2.15 - 3.25 V
Signal current > 1.1 A
Signal voltage deviation
> ± 0.3 V
Airbag(s) activated
Transport mode active
CAN message, no feedback
Global Time Out failure
received by ECM
CAN communication with ABS
Time Out - no message.
CAN communication with
gateway Time Out - no message
No CAN messages received
AT vehicle ECM coded as MT
vehicle
Transmission Data Length Code
incorrect