Changing The Waste Dry Ink Bottle - Xerox DocuColor 7000AP User Manual

Changing the Waste Dry Ink Bottle

Do c u Co lo r 70 0 0A P /8 0 00 A P U s er G u i de
Do not fill above the MAX line.
4.
Replace the reservoir cap and close the Right
5.
Front Door.
Change the Waste Bottle when the "Change Waste
Bottle" message is displayed on the UI.
The waste bottle is located inside a lower rear
compartment of the Exit Module.
Open the Waste Bottle Door and pull the out
1.
the bottle.
2. Install the cap (found on the side of the bottle)
and dispose of the bottle in accordance to
local regulations.
Install the new bottle and close the door.
3.
9. M ai n te n an c e
click here for video
9-7