Xerox 450c Service Manual page 21

System Check: Receive Fax test
At a remote machine, dial
the customer number. Make
sure Answer Mode is Auto.
The customer's machine
answers the incoming call.
YES
The following displays on the
LCD:
Connecting...
Press START. The following
Fax tones are audible.
The receive LED is lit during
receipt, and turns off after the
entire fax is received.
The following displays on the
LCD:
Receiving 01
Press START. The following
xxx-xxxx xx% free
The following displays on the
LCD:
Receiving 01
Press START. The following
xxx-xxxx xx% free
Continued on following page
Xerox WorkCentre 450c/450cp Service Manual
NO
Go to Analog Communications
RAP 6.1
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
Go to Analog Communications
RAP 6.1
Go to LED RAP 7.3.
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
www.printcopy.info
Page 1-9