Xerox 450c Service Manual page 137

BIT No NAME
E ID_REQUEST
F RESERVED
S/W Switch 1
BIT No NAME
1 ~ 0 MODEM_EQLZ
2 CNG_XMT
3 RTN_XMT
5 ~ 4 ERROR_LINE
6 FLAG_HOLD_TIME
Xerox WorkCentre 450c/450cp Service Manual
Define Default
0 : Prevent 1
1 : Allow
Define Default
00 : 0.0Km 10 Modem equalization
01 : 1.8Km
10 : 3.6Km
11 : 7.2Km
0 : OFF 1 CNG transmit in manual mode
1 : ON
0 : Disable 1 When the percentage of the
1 : Enable error line is over the
ERROR_LINE, RTN is transmit-
ted in case of ENABLE Other-
wise RTP is transmitted.
00 : 5% Error line 00 This ERROR_LINE will be refer-
01 : 10% Error line enced at end of page.
10 : 15% Error line The percent of error line is less
11 : 20% Error line than ERROR_LINE, MPS will be
transmitted.
The percent of error line is more
than ERROR_LINE, RTN(RTP)
will be transmitted.
0 : 90 Sec 0 Wait Time for a frame after
1 : 180 Sec reception of HDLC flag
www.printcopy.info
Description
Machine ID change – Certain
countries do not allow user to
change the Machine ID once
entered.
Description
Page 6-9