Omron F3SJ-E0185P25 User Manual page 91

3.
Slide the Intermediate Brackets to the mounting position of the wall. (Figure 18)
Backside mounting
Screws to mount the brackets to the wall are not included.
4.
Tighten the screws that fix the Intermediate Bracket and the wall. (Figure 19)
Tighten the screws to secure
the Intermediate
Brackets and the wall.
Backside mounting
5.
Tighten the hexagon socket head cap screw (M3 x 12) of Intermediate Bracket (1) with the tightening
torque at 0.54 N•m (recommended). (Figure 20)
Tightening screws with a torque that considerably exceeds the recommended torque may cause failure.
Adjust to the
mounting position
Figure 18
Tighten the screws to secure
the Intermediate
Brackets and the wall.
Side mounting
Figure 19
Tighten
securely
Hexagon socket head
cap screw (M3 x 12)
Figure 20
Wiring/Installation
Side mounting
E
F3SJ-E/B
75
User's Manual