Omron F3SJ-E0185P25 User Manual page 90

Wiring/Installation
 When using Intermediate Bracket (Free-Location Mounting)
1.
Loosen the hexagon socket head cap screws (M3 x 18) of Intermediate Bracket (3) and change the
direction of Intermediate Bracket (2) according to its mounting direction. (Figure 15 and 16)
Next, loosen the hexagon socket head cap screws (M3 x 12) of Intermediate Bracket (1) so that it can
be mounted to the case of the sensor.
For side mounting, the direction of Intermediate Bracket (2) that is inserted into Intermediate Bracket
(3) can be left-right in reverse.
Backside mounting
Hexagon socket head
cap screw (M3 x 18)
Side mounting
Hexagon socket head
cap screw (M3 x 12)
Hexagon socket head
cap screw (M3 x 18)
2.
Mount the Intermediate Bracket to the case, and lightly tighten the hexagon socket head cap screws
(M3 x 12) of Intermediate Bracket (1). (Figure 17)
Intermediate Bracket (1)
Tighten lightly
F3SJ-E/B
74
User's Manual
Hexagon socket head
cap screw (M3 x 12)
Loosen
Intermediate Bracket (1)
Loosen
Intermediate Bracket (3)
Figure 15
Intermediate Bracket (1)
Intermediate Bracket (2)
Loosen
Intermediate Bracket (3)
Backside mounting
Optical surface
Intermediate
Bracket (2)
Sensor is secured by
Intermediate Brackets.
Intermediate Bracket (2)
Intermediate
Bracket (2)
Figure 16
Optical surface
Intermediate
Bracket (3)
Intermediate Bracket (2)
Figure 17
Change the direction of
Intermediate Bracket (2) and insert it
into Intermediate Bracket (3).
Intermediate Bracket (1)
Loosen
Intermediate Bracket (3)
Side mounting
Intermediate Bracket (1)
Tighten lightly
Intermediate
Bracket (3)
Sensor is secured by
Intermediate Brackets.