Checking Points - DAELIM Q2 Owner's Manual

CHECKING POINTS

Checking points
Ignition system
1. Spark plug status
Gap
Central
electrode
Earth
electrode
2. Ignition timing
Hole
Mark
Sealed
engraving
mark
Fitting
mark
56
Checking
Detail checking contents
timing
(1) Separate the spark plug, check by
eye whether there is the
contamination and damage of
electrode, the damage or crack of
insulator.
(2) By using the wire brush or plug
cleaner, clean the spark plug and
6 Mon.
check whether the gap(plug gap)
(4,000km)
between the central electrode and
earth is within the designated range
or not, by using plug cap gauge
(The gap of spark plug : 0.8 ~ 0.9mm)
(1) After the engine got warm, check
by fitting F mark whether the
ignition timing is proper or not, by
using timing light at idling.
12Mon.
(8,000km)
Checking
Checking points
timing
Engine
1. Engine starting,
abnormal noise
12Mon.
(8,000km)
2. Low speed, acceleration
12Mon.
(8,000km)
Detail checking contents
(1) Check whether the engine operates
promptly and works well.
(2) At engine starting, check whether
there is abnormal noise at idling.
(1) On the condition that the engine
gets warm, check whether the
idling is kept continued smoothly
or not.
(2) When the engine operates slowly,
check whether the operation of
throttle grip has something or not,
or there is no engine stop,
knocking and the engine works
well.